Using ORiGiN O2 takes three easy steps — no preparation time, no PPE required:

1.  Fill — Pour water into a standard pail to the O2 pack’s reference height: 25 cm (approx. 10 L) for Small packs, or 30 cm (approx. 20 L) for Large packs. This ensures the correct dilution ratio.

2.  Dilute — Open the pack, drop the microfibre sheet into the water and stir for 1 minute until the bio-surfactant formula is fully released.

3.  Clean — Use the microfibre sheet as a wiping or scrubbing cloth, or apply the solution via brush or high-pressure jet to start hydrocarbon cleaning.

The formula is non-toxic and non-hazardous — no specialist handling or PPE is required for routine dilution and use.